Revo Digital video recorder Manual de usuario descargar pdf (Pagina 40)

User’s Manual

– Motion Search: Searches for images with changes in the Detection Area between two consecutive images (for

example, when there was movement).

– Museum Search: Searches for images with changes which last for the Activation Time in the Detection Area

when compared to the image displayed currently on the Search Screen (for example, when an object disappeared).

 Sensitivity: Sets the sensitivity of the change detection. The higher the number is, the more sensitive it is.

 Num of diff. block: Sets the minimum number of blocks that must be activated to be considered as a change (Motion

Search only).

 Diff. % to ref. image: Sets the minimum proportion (%) of blocks that must be activated to be considered as a change

(Museum Search only).

 Activation Time: Sets the duration that the change must last to be considered as a change (Museum Search only).

If a change is detected but does not last as long as the Activation Time, the change is not considered as a change.



(Detection Area Select/Clear): Sets the detection area on the Search Screen by selecting or clearing blocks.

 Search/Stop: Starts or stops searching. The last recorded image is displayed on the Search Screen.

 Next: Searching stops when the search results reach 100. Clicking the button continues searching.

 Reset: Resets the search condition.

4.3 ADDITIONAL FUNCTIONS

Save

Clicking the

button on the toolbar saves the image currently displayed on the screen as a bitmap or JPEG file. By

placing a checkmark in the box beside Include Image Info., text information about the site will be included when saving

the image.

Clicking the

button on the toolbar prints the image currently displayed on the screen on a printer connected to your

computer. By placing a checkmark in the box beside Include Image Info, text information about the site will be included

when printing the image.

Screen Menu

Selecting a camera on the Watch or Search screen and clicking the right mouse button display the popup menu.

 Change Camera Title: Changes the camera name displayed on the screen. Leaving the Camera

Title blank causes the camera name set up on the remote site to display. Changing the camera title

does not affect the camera name set up on the remote site.

 Enable Audio: Enables audio communication with the remote site on the Watch screen (Two-way

audio equipped remote sites only). Plays audio while playing back recorded video that has recorded

audio on the Search screen. Refer to 4.1 Live Monitoring and 4.2 Playback and Search for more details.

 Aspect Ratio: Changes the image aspect ratio displayed on each camera screen.

– Fit to Screen: Displays images by fitting them to the screen size.

– Original Ratio: Displays images by fitting them within the screen size while maintaining their

original ratio.

– Half Size (x0.5) to Quadruple Size (x4): Select the desired image size. Options are enabled

when the selected camera screen can display images in that size.

 MultiStream: Allows to choose the desired stream if the remote DVR is in the multistream mode for live monitoring.

 Set Record Camera: Sets the selected camera channel to be recorded during panic recording. Refer to 3.3 Menu – System

Menu for details on configuring camera channels for panic recording.

 Deinterlacing: Enhances image display quality of interlaced video on the screen by eliminating horizontal scan lines or noise

in areas with motion.

 Anti-Aliasing Screen: Enhances image display quality for all cameras on the screen by eliminating stair-stepping (aliasing)

effects in the enlarged image.

 Disconnect Camera: Disconnects a camera on the screen

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 58 59

Comentarios a estos manuales

Sin comentarios

Revo Digital video recorder Manual de usuario Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Revo Digital video recorder